Heat Press Instructions for DTF Transfers
All you need:
-
Any Garment
-
Logo Launch Transfer
-
Heat Press
1. Position Design
Place your artwork in the desired print area. You can use heat-resistant tape if you want, it is not needed though, However, it is highly recommended when pressing transfers onto hats to keep the transfer in place.
2. Press
Press your transfer with medium to high pressure at 325°F for 15 seconds.
3. Peel
Our transfers are Hot OR Cold peel-for best result, we recommend peeling from corner to corner in a diagonal movement.
4. Press again. (Optional)
It is not needed, but you can press again for even better results.
